JET A-1 fuel farms
Statutory inspection, frequency and related regulatory watch
Everything you need to keep your jet a-1 fuel farms compliant: frequency, statutory reference, competent bodies, documents to produce and recommended regulatory watch.
Frequency
Every 12 months
Statutory reference
COMAH 2015 / DSEAR 2002
Expected document
Inspection report + health & safety register
Main obligations
- Inspection every 12 months is mandatory (COMAH 2015 / DSEAR 2002).
- Initial inspection when commissioning or re-commissioning after a significant modification.
- Maintain a health & safety register in line with applicable UK HSE regulations.
- Retain reports for at least 5 years, and for the full asset lifetime for the initial inspection.
- Close out defects promptly and keep an auditable trail of corrective actions.
What our software automates
- Schedule and early alerts (T-60, T-30, T-7) for every asset.
- Checklists aligned with applicable UK regulations, signed electronically on mobile.
- Asset identification via QR code or NFC tag attached to the equipment (document pouch).
- Automatic generation of timestamped PDF reports and defensible archive.
- Defect tracking, repair costs and full CMMS history.
- Automatic updates when regulations change (built-in regulatory watch).
Recommended regulatory watch
Category 7
Storage tanks & bulk containers
Above-ground storage tanks (AST) containing fuels, chemicals or hazardous substances are subject to DSEAR 2002, COMAH 2015 (where thresholds apply) and industry codes such as EEMUA 159.
Category 6
Construction — CDM inspections and scaffold checks
The Construction (Design and Management) Regulations 2015 impose duties on all dutyholders. Work at Height Regulations 2005 require scaffold and work-at-height equipment to be inspected before use and at set intervals.
Category 1
Local Exhaust Ventilation (LEV) & workplace ventilation
COSHH reg. 9 requires that engineering controls provided to control exposure to hazardous substances — typically LEV systems — are examined and tested at suitable intervals. HSG258 sets out the industry-standard methodology for LEV thorough examination and test.
Other assets in the industry Aviation
Hangar overhead cranes (MRO)
Every 12 months • LOLER 1998
Aircraft jacks & docking
Every 12 months • Part-145 / EN 1494
Passenger boarding bridges (PBB)
Every 6 months • LOLER 1998 / DIN 16005
Tractors & pushback GSE
Every 12 months • IATA AHM 913
De-icers & service trucks
Every 12 months • ISO 11075
High-pressure O2 & N2 systems
Per WSE (typ. 26 to 40 months) • PSSR 2000
Keep your assets fully compliant
Centralise inspections, automate due-date reminders and generate your statutory registers in one click. Personalised demo within 24 hours.