Glossary & resources

    Statutory compliance, TET & CMMS glossary

    Every definition, statutory duty and best practice you need to run compliance across your assets, sites and contractors — mapped to UK regulations and HSE ACoPs.

    LOLER: definition, meaning and duty holder obligations

    LOLER stands for the Lifting Operations and Lifting Equipment Regulations 1998. Full definition, equipment covered, inspection frequency, penalties and recommended LOLER software.

    PUWER: definition, scope and employer duties

    PUWER stands for the Provision and Use of Work Equipment Regulations 1998. Scope, employer duties, inspection frequencies, enforcement and PUWER software.

    Thorough Examination and Test (TET): what UK duty holders must know

    Thorough Examination and Test (TET) under LOLER and PUWER: 6-month and 12-month intervals, competent person, Report of Thorough Examination and TET software.

    Competent person under LOLER and PUWER: definition and duties

    Who is a competent person under LOLER and PUWER? HSE definition, LEEA training routes, independence requirements and how Cloud VGP supports them.

    PSSR 2000: pressure systems safety in plain English

    PSSR (Pressure Systems Safety Regulations 2000): written scheme of examination, competent person, inspection intervals and PSSR-ready software.

    RIDDOR: what UK employers must report and when

    RIDDOR (2013): the incidents UK employers must report to the HSE, the 10-day and 15-day deadlines and how Cloud VGP logs incidents in one place.

    CMMS: computerised maintenance management explained

    CMMS (Computerised Maintenance Management System): definition, features, difference from an EAM, and why a unified CMMS + TET platform beats two silos.

    PPM (Planned Preventive Maintenance): definition and best practice

    PPM (Planned Preventive Maintenance): what it means, how to build a schedule, KPIs to track, and how a CMMS + TET platform automates it.

    Permit-to-work: hot work, confined space and high-risk permits

    Permit-to-work (PTW) explained: hot work permit, confined space, working at height. HSG250 guidance, digital PTW workflow and 1-hour fire watch.

    Site induction: what a UK safety induction must cover

    Site induction under CDM 2015 and HSG150: mandatory content, digital induction workflow, quiz sign-off, refresh cycle and audit-ready records.

    LOLER training: LEEA, CPCS and competent-person routes

    LOLER training routes in the UK: LEEA foundation & general diplomas, CPCS, IPAF competent-person, typical duration and cost, and the software LOLER inspectors use in the field.

    CMMS vs EAM vs TET software: which does a UK duty holder need?

    CMMS, EAM and TET software compared for UK duty holders. When you need each, why unifying them beats a three-vendor stack, and where Cloud VGP fits.