Health and Safety at Work etc. Act 1974, s.2: every employer has a duty to ensure, so far as is reasonably practicable, the health, safety and welfare at work of all employees, including the provision and maintenance of plant and systems of work that are safe.
Statutory inspections at a glance
Complete reference for statutory inspections applicable to work equipment, technical installations and workplace environments in the UK. For each asset: type of inspection, frequency, competent person, record required and reference regulation.
A platform aligned with UK statutory duties and international frameworks
Beyond the UK, Cloud VGP covers OSHA (US), CSA (Canada), NR (Brazil), the EU PED and BetrSichV frameworks, and 55 jurisdictions across the Middle East, Africa and Asia-Pacific — each mapped to their regulations, notified bodies and frequencies.
The legal framework for statutory inspections
Provision and Use of Work Equipment Regulations 1998 (PUWER), reg. 6: work equipment exposed to conditions causing deterioration liable to result in dangerous situations must be inspected at suitable intervals and each time exceptional circumstances have occurred.
Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), reg. 9: lifting equipment must undergo a thorough examination — every 6 months for equipment used to lift persons and accessories, every 12 months for other lifting equipment, or in accordance with an examination scheme drawn up by a competent person.
When are the inspections carried out?
On installation / first use
Before a piece of work equipment is put into service for the first time, or after assembly at a new site, PUWER reg. 6 requires an inspection by a competent person to ensure it has been installed correctly and is safe to operate. LOLER reg. 9(1) additionally requires a thorough examination of lifting equipment before it is used for the first time at the location.
During use
Two regimes coexist: routine pre-use checks by the trained operator, and statutory thorough examinations by a competent person. HSE ACoP L113 clarifies that the competent person must be sufficiently independent and impartial. Thorough examination intervals must never exceed the statutory maximum (6 or 12 months), unless a written scheme of examination has been established.
Following an HSE improvement notice
An HSE inspector may issue an improvement or prohibition notice requiring the duty holder to have work equipment thoroughly examined by an accredited competent person before it is returned to service.
Who carries out the inspections?
Thorough examinations must be carried out by a 'competent person' — someone with the appropriate practical and theoretical knowledge and experience to detect defects and assess their importance in relation to the safety and continued use of the equipment. For lifting equipment, HSE ACoP L113 recommends the competent person be sufficiently independent of the day-to-day operation. UKAS-accredited third-party bodies (e.g. inspection bodies to ISO/IEC 17020) are widely used for higher-risk equipment.
Which records are required?
- •Every thorough examination must be recorded in a Report of Thorough Examination (LOLER Schedule 1 for lifting equipment; the equivalent record for pressure systems under PSSR 2000).
- •Reports must be kept available for inspection by an HSE inspector for the periods specified in the Regulations — typically 2 years for lifting equipment reports, or until the next report supersedes it. Written Schemes of Examination for pressure systems must be retained for the life of the plant.
- •Any defect that presents 'existing or imminent danger' must be reported to the enforcing authority (HSE or the local authority) as soon as reasonably practicable, in line with LOLER reg. 10(1)(b).
- •A single digital Health & Safety register may consolidate all inspection, maintenance, competence and PPE records to satisfy PUWER, LOLER, PSSR and management-of-H&S obligations.
Practical guides
Deep dives into the most-searched technical topics around statutory inspections.
The 8 categories of statutory inspection
Explore each category
Each category has its own page with sub-sections, obligation tables (object, type, frequency, competent person, record, reference) and applicable regulations.
Local Exhaust Ventilation (LEV) & workplace ventilation
COSHH reg. 9 requires that engineering controls provided to control exposure to hazardous substances — typically LEV systems — are examined and tested at suitable intervals. HSG258 sets out the industry-standard methodology for LEV thorough examination and test.
Pressure systems (PSSR)
The Pressure Systems Safety Regulations 2000 (PSSR) require the user to have a Written Scheme of Examination (WSE) drawn up by a competent person covering all relevant parts of the system, and to ensure the system is examined in accordance with that scheme.
Lifts, hoists and MEWPs
Passenger and goods lifts, work platforms and MEWPs used at work are lifting equipment for the purposes of LOLER 1998. Passenger lifts installed on or after 1999 must additionally satisfy the Lifts Regulations 2016.
Cranes, forklifts and lifting accessories (LOLER)
Cranes, forklift trucks, telehandlers, chains, slings, shackles and eyebolts fall under LOLER 1998. Duty holders must ensure lifting equipment is strong and stable for each intended use, and thoroughly examined at the statutory intervals.
Noise & hand-arm vibration
The Control of Noise at Work Regulations 2005 and the Control of Vibration at Work Regulations 2005 require duty holders to assess exposure, apply the hierarchy of control and monitor exposure at appropriate intervals.
Construction — CDM inspections and scaffold checks
The Construction (Design and Management) Regulations 2015 impose duties on all dutyholders. Work at Height Regulations 2005 require scaffold and work-at-height equipment to be inspected before use and at set intervals.
Storage tanks & bulk containers
Above-ground storage tanks (AST) containing fuels, chemicals or hazardous substances are subject to DSEAR 2002, COMAH 2015 (where thresholds apply) and industry codes such as EEMUA 159.
Docks, ports & shipyards
The Docks Regulations 1988 and MCA guidance require inspection of lifting appliances used in docks and shipyard access equipment, complemented by LOLER for lifting operations onshore.
Disclaimer. Cette page est une an educational summary based on HSE guidance and applicable statutory instruments Statutory thorough examinations — UK duty holder overview (HSE ACoPs & BS EN standards, Updated 2026). It is no substitute for the regulations themselves or for a competent person's inspection report. For precise technical thresholds, specific frequencies and the exhaustive list of affected equipment, refer to the cited regulations.
Our platform automates every step of this compliance duty: scheduling, deadline alerts, timestamped reports, a single digital health & safety register and immutable historical records retained per HSE retention requirements.
Manage your compliance in real time
Centralise every statutory inspection, assign them to competent persons, never miss a deadline and keep a compliant digital H&S register up to date.
Start a free trial2026 regulatory calendar
6 updates analysed and classified by theme, sector and impact: LOLER, PSSR, lifts, EAWR, CDM, LEV and more.
Frequently asked questions
What is a Thorough Examination and Test (TET) under LOLER and PUWER?
A Thorough Examination and Test is the statutory inspection required by LOLER 1998 for lifting equipment and PUWER 1998 for other work equipment. It must be carried out by a competent person and recorded in a Report of Thorough Examination. Standard intervals are 6 months for lifting equipment used to lift persons and for lifting accessories, and 12 months for other lifting equipment.
Who can act as a 'competent person' for a Thorough Examination?
A competent person is someone with the appropriate practical and theoretical knowledge and experience to detect defects and assess their importance. For higher-risk equipment, HSE ACoP L113 recommends the competent person be sufficiently independent of the day-to-day operation — in practice, a UKAS-accredited third-party inspection body (ISO/IEC 17020) is the strongest position.
What records must I keep after a Thorough Examination?
A Report of Thorough Examination signed by the competent person, retained for at least 2 years (LOLER) or until superseded by the next report; the plant's history, including any defect notifications under LOLER reg. 10; and the training and authorisation records for the operators. Written Schemes of Examination for pressure systems must be retained for the life of the plant.
What happens if statutory inspections are missed?
HSE can issue an improvement or prohibition notice, and in the event of an incident the duty holder may face prosecution under the Health and Safety at Work etc. Act 1974. Beyond the statutory penalty, the business risk is operational — a prohibition notice on a lifting appliance in a warehouse can suspend all lifting operations until compliance is proven.
How often are the UK regulations updated?
The core Regulations (LOLER, PUWER, PSSR, EAWR) are amended infrequently, but the associated ACoPs, HSE research reports and BS/EN standards evolve continuously. Cloud VGP's insights track those changes for the UK duty holder and update the register templates within 30 days of a material change.
How does Cloud VGP automate UK compliance monitoring?
The insights module receives every material HSE ACoP or BS/EN update, filters those relevant to your asset base and sectors, and automatically re-schedules the affected thorough examinations, updates the digital H&S register and alerts the duty holder.
Manage these duties with Cloud VGP
The modules and industries most relevant to UK statutory inspections.
Thorough Examinations
Statutory thorough examinations across every asset family
Explore featureInspections
Thorough examinations, commissioning and ad-hoc inspections on every asset
Explore featureLifting
Cranes, MEWPs, hoists and lifting accessories under LOLER 1998
Explore featurePressure Systems
PSSR Written Scheme of Examination management
Explore feature