Contrôle New

    Inspections & Statutory Examinations

    Thorough examinations, commissioning and ad-hoc inspections on every asset

    The Inspections module covers the full statutory examination cycle end-to-end: scheduling, offline field execution, automated compliant reporting and time-stamped archiving. It aligns with LOLER 1998 Regulation 9, PUWER 1998 Reg. 6, PSSR 2000 Written Schemes and the record-keeping duties of HSWA 1974.

    Inspections is the core Cloud VGP module: it unifies thorough examinations, commissioning inspections, return-to-service checks and ad-hoc inspections in one mobile, offline-first, defensible platform. A field engineer completes an inspection in under 8 minutes on average, with a time-stamped, eIDAS-signed PDF report auto-archived.

    8 min
    Average field inspection (vs 45 min on paper)
    100%
    Reports aligned with LOLER 1998 Sched. 1
    0
    Data loss thanks to offline + auto-sync
    10 yrs
    Immutable time-stamped archive included

    Related practical guide

    Go deeper into this topic with our educational reference material.

    Key benefits

    Every asset covered

    Lifting, PPE, electrical, gas, fire, pressure systems, lifts, automatic doors, wind, PV, nuclear.

    Defensible reports

    Pre-set templates aligned with LOLER, PUWER, PSSR and RRO 2005, eIDAS-grade signature and time-stamp.

    Full offline mode

    Run inspections with no signal; automatic encrypted sync when back on Wi-Fi or 4G/5G.

    Defect close-out

    Every finding becomes a tracked action with photo evidence and owner.

    Detailed capabilities

    • Permit-to-work and safe-system-of-work templates
    • Dynamic checklists per asset type and per standard
    • Geo-tagged photos and image annotations
    • PDF report with QR verification code
    • Unlimited history and defensible audit trail
    • Multi-examiner, multi-site, multi-client

    Regulatory framework covered

    LOLER 1998, Reg. 9

    Thorough examination of lifting equipment

    Primary framework for lifting examinations: 6-monthly for lifting of persons / 12-monthly for lifting of loads, load tests, report content and register duties.

    PUWER 1998, Reg. 6

    Inspection of work equipment

    Initial, periodic and ad-hoc inspections. Records kept and available to HSE inspectors under Reg. 6(4).

    PPE at Work Regs 2022

    Personal protective equipment

    Cat. III fall-arrest PPE: annual thorough inspection by a competent person, traceability by serial number.

    LOLER 1998 (lifts scope)

    Passenger and goods lift examinations

    6-monthly examinations, commissioning and return-to-service after modification.

    EAWR 1989 / BS 7671

    Fixed electrical installations

    EICR every 3 to 5 years, initial verification, periodic testing per BS 7671 (18th edition).

    Retained Reg. (EU) 2016/425

    PPE placing on the market and inspection

    Category III: mandatory annual thorough inspection, serial-number traceability.

    DSEAR 2002

    Dangerous Substances and Explosive Atmospheres

    Inspection of equipment in Zone 0/1/2 (gas) and 20/21/22 (dust), Explosion Protection Document and register.

    PSSR 2000

    Pressure Systems Safety Regulations

    Written Scheme of Examination, requalification, commissioning inspections — evidence pack expected by the HSE.

    All regulated assets

    Over 400 pre-configured checklists cover asset families subject to LOLER, PUWER, PSSR, HSE regulations and applicable British Standards.

    Lifting & materials handling

    • Tower cranes, mobile cranes, lorry loaders
    • Forklifts, telehandlers, powered pallet trucks
    • MEWPs, cherry pickers, scissor lifts
    • Overhead cranes, gantries, hoists, winches
    • Slings, hooks, shackles, lifting accessories
    • Passenger lifts, goods lifts, platform lifts

    PPE & work at height

    • Fall-arrest harnesses, lanyards, energy absorbers
    • Fixed and portable anchor systems
    • Horizontal and vertical lifelines
    • Ladders, stepladders, mobile scaffolds
    • Category III PPE (helmets, gloves, safety footwear)

    Fire safety

    • Portable fire extinguishers (BS 5306-3)
    • Hose reels (BS EN 671-3)
    • Automatic smoke ventilation (AOV)
    • Fire alarm systems (BS 5839-1)
    • Fire doors, dampers, smoke curtains
    • Dry and wet risers

    Electrical & energy

    • LV / HV fixed installations (EICR)
    • RCDs, arc fault detection, protective devices
    • HV/LV substations
    • Solar PV, wind, EV chargers (EVSE)
    • Standby generators, UPS, battery banks

    Pressure, gas & fluids

    • Pressure systems (PSSR)
    • Boilers, steam generators, autoclaves
    • Gas installations, pipework, regulators
    • Air compressors, receivers
    • Chilled water systems, refrigeration

    Construction & heavy industry

    • Machine tools, presses, guillotines
    • Conveyors, belts, elevators
    • Automatic doors, gates, dock levellers
    • DSEAR-classified installations
    • Nuclear pressure equipment (NPS)

    How it works, step by step

    1. 1

      1. Scheduling & assignment

      Smart scheduler aligned with statutory intervals. Assignment to examiners by site, competence and accreditation. Alerts at T-60 / T-30 / T-7 days for the operator and the dutyholder.

    2. 2

      2. Inspection preparation

      Rich asset record (make, serial, history, manual), standard-specific checklist, permit-to-work, method statement and required PPE loaded automatically on mobile.

    3. 3

      3. Field execution (offline)

      Tablet or smartphone inspection, no signal required: geo-tagged photos, measurements, load tests, image annotations, QR/NFC scan for instant asset identification.

    4. 4

      4. Report & electronic signature

      PDF report generated in the regulatory format, eIDAS-signed (qualified), time-stamped and sealed. Immediate e-mail to the client and to the digital safety register.

    5. 5

      5. Defect close-out

      Findings become tracked actions with named owners and before/after photos. Close-out logged, client notified, re-inspection triggered automatically when required.

    6. 6

      6. Archiving & audit

      Time-stamped archive kept for a minimum of 10 years, instant access for the HSE, local authority or insurer. Per-site or per-client ZIP export in one click.

    Real-world use cases

    UKAS-accredited inspection body

    Context: 20 examiners on the road, 8,000 assets to examine every year across 500 clients, contract commitment to deliver reports within 48 hours.

    Outcome: 60% less administrative time, +35% inspections per examiner, zero lost report.

    HSE / SHEQ team on a COMAH site

    Context: Upper-tier COMAH site with 1,200 pressure, DSEAR, lifting and PPE assets, full audit trail required.

    Outcome: Safety register always up to date, HSE audit prep divided by 5, proactive alerts.

    Plant hire company

    Context: Fleet of 800 MEWPs, forklifts and cranes hired across the UK, LOLER must be current at every hire.

    Outcome: Hire blocked automatically if thorough examination has lapsed, hirer scans a QR code to see history.

    Multi-site facilities manager

    Context: Portfolio of 120 commercial buildings, several external contractors, need to centralise every inspection.

    Outcome: Real-time consolidated view, per-site compliance dashboard, simplified contractor coordination.

    Frequently asked questions

    Want to try Inspections?

    Personalised demo or a 30-day free trial, no credit card.

    Regulatory updates

    Analyses, statutory instruments and deadlines to know to stay compliant on this module.

    All updates