DSEAR equipment (Zones 0/1/2 & 20/21/22)
Statutory inspection, frequency and related regulatory watch
Everything you need to keep your dsear equipment (zones 0/1/2 & 20/21/22) compliant: frequency, statutory reference, competent bodies, documents to produce and recommended regulatory watch.
Frequency
Every 3 years
Statutory reference
BS EN 60079-17
Expected document
Inspection report + health & safety register
Main obligations
- Inspection every 3 years is mandatory (BS EN 60079-17).
- Initial inspection when commissioning or re-commissioning after a significant modification.
- Maintain a health & safety register in line with applicable UK HSE regulations.
- Retain reports for at least 5 years, and for the full asset lifetime for the initial inspection.
- Close out defects promptly and keep an auditable trail of corrective actions.
What our software automates
- Schedule and early alerts (T-60, T-30, T-7) for every asset.
- Checklists aligned with applicable UK regulations, signed electronically on mobile.
- Asset identification via QR code or NFC tag attached to the equipment (document pouch).
- Automatic generation of timestamped PDF reports and defensible archive.
- Defect tracking, repair costs and full CMMS history.
- Automatic updates when regulations change (built-in regulatory watch).
Recommended regulatory watch
Category 3
Lifts, hoists and MEWPs
Passenger and goods lifts, work platforms and MEWPs used at work are lifting equipment for the purposes of LOLER 1998. Passenger lifts installed on or after 1999 must additionally satisfy the Lifts Regulations 2016.
Category 4
Cranes, forklifts and lifting accessories (LOLER)
Cranes, forklift trucks, telehandlers, chains, slings, shackles and eyebolts fall under LOLER 1998. Duty holders must ensure lifting equipment is strong and stable for each intended use, and thoroughly examined at the statutory intervals.
Category 6
Construction — CDM inspections and scaffold checks
The Construction (Design and Management) Regulations 2015 impose duties on all dutyholders. Work at Height Regulations 2005 require scaffold and work-at-height equipment to be inspected before use and at set intervals.
Category 7
Storage tanks & bulk containers
Above-ground storage tanks (AST) containing fuels, chemicals or hazardous substances are subject to DSEAR 2002, COMAH 2015 (where thresholds apply) and industry codes such as EEMUA 159.
Other assets in the industry Chemical & Pharma
Chemical pressure systems
Per WSE (typ. 26 to 120 months) • PSSR 2000
Pressure safety valves
Every 4 years • PSSR 2000 / HSG 250
ISO 5 to ISO 8 cleanrooms
Every 6 to 12 months • ISO 14644-2
Pharma utilities (PW, WFI, pure steam)
Every 12 months • European Pharmacopoeia
Air handling units (AHU)
Every 12 months • ISO 14644-3
Toxic gas detection
Every 6 months • BS EN 60079-29-2
Keep your assets fully compliant
Centralise inspections, automate due-date reminders and generate your statutory registers in one click. Personalised demo within 24 hours.