Digesters & gas holders (DSEAR)
Statutory inspection, frequency and related regulatory watch
Everything you need to keep your digesters & gas holders (dsear) compliant: frequency, statutory reference, competent bodies, documents to produce and recommended regulatory watch.
Frequency
Every 12 months
Statutory reference
DSEAR 2002 / BS EN 60079-17
Expected document
Inspection report + health & safety register
Main obligations
- Inspection every 12 months is mandatory (DSEAR 2002 / BS EN 60079-17).
- Initial inspection when commissioning or re-commissioning after a significant modification.
- Maintain a health & safety register in line with applicable UK HSE regulations.
- Retain reports for at least 5 years, and for the full asset lifetime for the initial inspection.
- Close out defects promptly and keep an auditable trail of corrective actions.
What our software automates
- Schedule and early alerts (T-60, T-30, T-7) for every asset.
- Checklists aligned with applicable UK regulations, signed electronically on mobile.
- Asset identification via QR code or NFC tag attached to the equipment (document pouch).
- Automatic generation of timestamped PDF reports and defensible archive.
- Defect tracking, repair costs and full CMMS history.
- Automatic updates when regulations change (built-in regulatory watch).
Recommended regulatory watch
Category 7
Storage tanks & bulk containers
Above-ground storage tanks (AST) containing fuels, chemicals or hazardous substances are subject to DSEAR 2002, COMAH 2015 (where thresholds apply) and industry codes such as EEMUA 159.
Category 4
Cranes, forklifts and lifting accessories (LOLER)
Cranes, forklift trucks, telehandlers, chains, slings, shackles and eyebolts fall under LOLER 1998. Duty holders must ensure lifting equipment is strong and stable for each intended use, and thoroughly examined at the statutory intervals.
Category 5
Noise & hand-arm vibration
The Control of Noise at Work Regulations 2005 and the Control of Vibration at Work Regulations 2005 require duty holders to assess exposure, apply the hierarchy of control and monitor exposure at appropriate intervals.
Category 1
Local Exhaust Ventilation (LEV) & workplace ventilation
COSHH reg. 9 requires that engineering controls provided to control exposure to hazardous substances — typically LEV systems — are examined and tested at suitable intervals. HSG258 sets out the industry-standard methodology for LEV thorough examination and test.
Other assets in the industry Water & Wastewater
Pumps & boosters
Every 12 months • PUWER 1998
Water towers (drone inspection)
Every 5 years • Water Supply Regs 2018 / DWI
Chlorine / ozone pressure systems
Per WSE (typ. 14 to 40 months) • PSSR 2000
WwTP tanks, mixers & scrapers
Every 12 months • Urban Waste Water Regs
Sewage pumping stations & confined spaces
Every 12 months • Confined Spaces Regs 1997
Electrochlorination & dosing
Every 12 months • DWI Guidance
Keep your assets fully compliant
Centralise inspections, automate due-date reminders and generate your statutory registers in one click. Personalised demo within 24 hours.